EN 10219 S235JRH Pipe

EN 10219 S235JRH Pipe

1.0039 Steel Square Tube and EN 10219 Welded hollow section supplier in India

We are one of the top manufacturers and suppliers of pipes of various grades in India. Our products are exported worldwide. The EN 10219 S235JRH steel grade is a popular one and is used in multiple industries. The EN 10219 S235JRH Pipe comes with a list of impressive mechanical features, which is one of the primary reasons behind its popularity. Some of the features of the S235JRH Material are good conductivity, resistivity, and hardness. All the EN 10219 S235JRH Tube we manufacture is made from the best raw material. It means that our products like the S235JRH Hollow section pipe are very durable and can last for many years. The properties of the EN 10219 Welded hollow section help it to have such a long service life.

Due to the longevity and low maintenance cost of the S235JRH EN 10219 CHS Tube, it is one of the most affordable choices available. The Cold Formed S235JRH Steel Welded Pipe is popular in industries like the petrochemical and the energy sector. In the engineering world, the BS EN 10219 Structural hollow section is often used for different civil engineering purposes like bridges and also water engineering. The 1.0039 Steel Square Tube is also commonly used for various mechanical engineering purposes.

The EN 10219-1 S235JRH Rectangular tube material comes with high weldability, and it can easily be welded using standard practices. We have a vast stock of EN 10219-2 S235JRH RHS Tube available at our disposal. Clients with their specific DIN 17120 S235JRH Circular Hollow Section - CHS or pipes requirements can contact us directly. We offer full customization according to the needs specified.

We use state-of-the-art technologies in the manufacturing process of DIN 17120 EN 10219 Square Hollow Section – SHS. It helps in making our products dimensionally accurate. We also follow the industrial standards while manufacturing EN 10219 Standard Rectangular Hollow Section – RHS to ensure safety and functionality.

We conduct comprehensive tests and get the EN 10219 Steel Grade Square Hollow Pipe certified before delivering it to our clients. The whole manufacturing and testing process of the Welded EN 10219 Hollow Sections takes place under expert supervision. For the convenience of our clients, we offer doorstep delivery of Seamless EN 10210 Hollow Sections.

EN 10219 S235JRH Pipe

Table of contents

Cold Formed Or Hot Formed BS EN 10219 Structural hollow section and S235JRH Material as per IS 1387/ IS 4923 / IS 1161

EN 10219 S235JRH Pipe
EN 10219 S235JRH Pipe
EN 10219 S235JRH Welded Pipe
EN 10219 S235JRH Welded Pipe
EN 10219 S235JRH Seamless Pipe
EN 10219 S235JRH Seamless Pipe
EN 10219 S235JRH Pipe Specifications
Lengths 6.0 +/- 0.05 Meter
Straightness Min 1 = 200 of any lengths measured along the centre line unless otherwise specifically managed
Tolerance max 2 ± 0.05 mm
End Finish mill-cut finish without further machining, Plain ended-Mechanically sheared
Surface Finish Black without any surface treatment of oiling /varnishing.
Weldability Structura Steel Hollow Sections are weldable with standard M.S. Electrodes without any pre-heating.

EN 10219 S235JRH Tube and DIN 17120 S235JRH Circular Hollow Section - CHS / Rectangular Hollow Section – RHS Suitable For Commercial, Residential, Or Infrastructure Projects

Buy EN 10219 S235JRH Pipe in India at dealer price, ask for a free sample now!

S235JRH Pipe Manufacturing Types
EN 10219 S235JRH Seamless Pipe
EN 10219 S235JRH Seamless Pipe
S235JRH ERW Pipe
S235JRH ERW Pipe
EN 10219 Welded Pipe
EN 10219 Welded Pipe
S235JRH Steel Cold Drawn Seamless Pipe
S235JRH Steel Cold Drawn Seamless Pipe
S235JRH EN 10219 SAW Pipe
S235JRH EN 10219 SAW Pipe
1.0039 Steel EFW Pipe
1.0039 Steel EFW Pipe

Many EN 10219 S235JRH Pipe wholesaler, traders, stockist, retailer, stockholders, importers, suppliers, exporters, dealers, distributors prefer to buy EN 10219 S235JRH material from Trident Steel and supply S235JRH Pipes in their own countries with higher margins, so buy directly from Trident Steel to save your cost, contact us for a free quote !!!

EN 10219 S235JRH Pipe Price in India
Ss400 St37 Mild Steel Ms Fence 12x12x1.6 Square Tubes Pipe S235jrh En 10219
Ss400 St37 Mild Steel Ms Fence 12x12x1.6 Square Tubes Pipe S235jrh En 10219
Price : $400.00 / Ton
Square Carbon Steel En 10219 Hollow Section Square Rectangular Carbon Steel Pipe
Square Carbon Steel En 10219 Hollow Section Square Rectangular Carbon Steel Pipe
Price : $600.00 / Ton
En 10219 S235jrh Ms Cold Formed Rectangular Tube
En 10219 S235jrh Ms Cold Formed Rectangular Tube
Price : $550.00 / Ton
Bs En 10219 S235jrh Shs And Chs Steel Pipe
Bs En 10219 S235jrh Shs And Chs Steel Pipe
Price : $700.00 / Ton
Din En 10219 S235jrh En 10219 40x40 Ms Square And Rectangular Steel Tube Hollow Sections
Din En 10219 S235jrh En 10219 40x40 Ms Square And Rectangular Steel Tube Hollow Sections
Price : $550.00 / Ton
S235jrh En 10219 Cold Drawn Square Seamless Steel Tube
S235jrh En 10219 Cold Drawn Square Seamless Steel Tube
Price : $480.00 / Ton

All Above Prices USD/ Ton
Additional Price Factors
Fix length Cost: 3% Extra
Double Random EN 10219 S235JRH Pipe Length Cost : 3% Extra
Inspection: EXTRA AS ACTUAL
Minimum Order Quantity (MOQ): All small/ large quantity
Supplier & exporter of S235JRH Hollow section and EN 10219-2 S235JRH RHS Tube, check EN 10219 Steel Grade Square Hollow Pipe equivalent, properties and price list ex Mumbai
EN 10219 Pipe Types
BS 10219 S235JR cold formed SHS 120*120*4mm hollow section tube
BS 10219 S235JR cold formed SHS 120*120*4mm hollow section tube
En10219 Gr S235JR steel pipe
En10219 Gr S235JR steel pipe
EN 10219 Gr S235JR welded steel pipe
EN 10219 Gr S235JR welded steel pipe
EN 10219 S235jr 14 in spiral welded steel pipe
EN 10219 S235jr 14 in spiral welded steel pipe
BS EN 10219 S235JR Steel Pipe
BS EN 10219 S235JR Steel Pipe
EN 10219 S235JR Cold Formed 3PE Coating Sch 40 Steel Pipe
EN 10219 S235JR Cold Formed 3PE Coating Sch 40 Steel Pipe
EN 10219 s235jr mild steel pipe
EN 10219 s235jr mild steel pipe
DIN 17120 S235jr steel pipe
DIN 17120 S235jr steel pipe
EN 10219 S235jr Shs & Chs Steel Pipe
EN 10219 S235jr Shs & Chs Steel Pipe
S235JRH Steel Seamless Pipe Types
Cold Formed S235JRH Steel Welded Pipe and EN 10219-1 S235JRH Rectangular tube available In Exact or Random Length
EN 10219 S235JRH Seamless Pipe
EN 10219 S235JRH Seamless Pipe
S235JRH Cold Drawn Seamless Pipe
S235JRH Cold Drawn Seamless Pipe
EN 10219 Schedule 40 Seamless Pipe
EN 10219 Schedule 40 Seamless Pipe
S235JRH EN 10219 ERW Pipe Types
EN 10219 S235JRH Welded Pipe
EN 10219 S235JRH Welded Pipe
S235JRH EFW Pipe
S235JRH EFW Pipe
EN 10219 LSAW Pipe
EN 10219 LSAW Pipe
1.0039 Steel Pipe for sale
Schedule 40 S235JRH Seamless Pipes EN 10219 S235JRH CDW Pipes
1IN NB Steel Pipes SCH 80 EN 10219 SMLS Pipes
1.0039 Steel Ptfe Lined Pipes 8" 29mm EN 10219 Material
EN 10219-1 S 235 JRH 10" Sch 160 Pipes EN 10219-2 S 235 JRH Thick Wall Seamless Pipes
Welded DIN 17120 Cold Drawn Pipes EN 10219 Steel Grade Schedule 40 Pipes
EN 10219 Welded Pipes 12" Sch 140 Seamless Pipes
10219 EFW Pipes Steel ERW Pipes
10219 Boiler Pipes 1.0039 Steel 12" 37mm WT Pipes
12" sch 100 EN 10219-1 Seamless Pipes EN 10219-2 Sch 80 Pipes
DIN 17120 S235JRH Hot Dip Galvanized Pipes ASME B36.10 EN 10219 Steel Grade Bevelled SMLS Pipes
Cold Drawn EN 10219 S235JRH Seamless Pipes 12" SCH. STD S235JRH Pipes SMLS BE
Europe/ Japan/ USA make EN 10219 Pipes S235JRH Steel Pipes, SCH 160, PL END
S235JRH 10219 Seam Welded Pipes SCH XS 1.0039 Steel Pipes
Saudi Aramco Approved 10219-1 S235JRH Pipes 10219-2 S235JRH Lined Pipes
SCHED 20 DIN 17120 S235JRH Boiler Seamless Pipes Thick Wall 10219 Steel Grade Pipes
High Temperature 10219 S235JRH Pipes ASME B36.10M 26” S235JRH Seamless Pipes, BE END
10219 Beveled End PCRMO ipe S235JRH Steel Sch. 80 200 DN 36 Pipes
S235JRH 10219 Fabricated Pipes 1.0039 Steel Round Pipes
10219-1 S235JRH Square Pipes 10219-2 S235JRH Epoxy Lined Pipes
S235JRH Pipe Tolerances
EN 10219 Pipe OD tolerance

EN 10219 Pipe OD tolerance

For EN 10219 pipe over 10 inch as special OD tolerance pipe, the OD shall within vary +1% /-1%.

S235JRH Steel Pipe Thickness tolerance

S235JRH Steel Pipe Thickness tolerance

S235JRH EN 10219 Pipe Length tolerance

For 1.0039 Steel Seamless and Welded pipe, if definite cut lengths are ordered, the length shall vary within -0mm / +6mm.

EN 10219-1 S235JRH Pipe Weight tolerance
  • For EN 10219 S235JRH pipe NPS 12 (DN300, 323.8mm) and under, the weight should vary within -3.5% / +10%.
  • For S235JRH pipe over NPS 12 (DN300, 323.8mm), the weight should vary within -5% / +10%.
  • EN 10219 Pipe of NPS 4 (DN100, 114.3mm) and smaller sizes may be weighed in convenient lots; S235JRH Steel pipe in sizes larger than NPS 4 should be weighed separately.
EN 10219-2 S235JRH Pipe Quantity tolerance

Normally EN 10219 S235JRH Pipe manufacturers take -10% to +10% tolerance, but Trident Steel keeps ±3% variation.

EN 10219 S235JRH Pipe Thickness Chart
Easily Bendable & Corrosion Resistant S235JRH EN 10219 CHS Tube and DIN 17120 EN 10219 Square Hollow Section – SHS supplier in Mumbai
EN 10219 S235JRH Pipe Thickness Chart
S235JRH Pipe Dimensions Chart
Standard-wall S235JRH Steel Pipe Dimensions, and Nominal Wall Thickness

EN 10219 Pipe Dimensions

EN 10219 S235JRH Rectangular Hollow Section Dimension

EN 10219 S235JRH Rectangular Hollow Section Dimension

BS EN 10219 Cold-formed Circular Hollow Sections
Outer Diameter (mm) Wall Thickness (mm) Kg/m Length (m)
21.3 x 3.0 1.35 7.5
26.9 x 2.0 1.23 7.5
2.5 1.50
3.0 1.77
33.7 x 2.0 1.56 7.5
2.5 1.92
3.0 2.27
4.0 2.93
42.4 x 2.0 1.99 7.5
2.5 2.46
3.0 2.91
4.0 3.79
48.3 x 2.0 2.28 7.5
2.5 2.82
3.0 3.35
4.0 4.37
60.3 x 3.0 4.24 7.5
4.0 5.55
76.1 x 3.0 5.41 7.5
4.0 7.11
5.0 8.77
88.9 x 3.0 6.36 7.5
4.0 8.38
5.0 10.35
101.6 x 3.0 7.29 7.5
114.3 x 3.0 8.23 7.5
3.5 9.56
5.0 13.48
6.0 16.03
139.7 x 5.0 16.61 7.5
168.3 x 5.0 20.14 7.5
S235JRH Steel Cold-formed Square Hollow Sections
HxB (mm) Wt (mm) Kg/m Er L (m)
20 x 20 x 2.0 1.12 4.0 7.5
25 x 25 x 2.0 1.43 4.0 7.5
2.5 1.75 5.0
3.0 2.05 6.0
30 x 30 x 2.0 1.74 4.0 7.5
2.5 2.14 5.0
3.0 2.52 6.0
40 x 40 x 2.0 2.37 4.0 7.5
2.5 2.92 5.0
3.0 3.46 6.0
4.0 4.48 8.0
50 x 50 x 2.0 2.99 4.0 7.5
2.5 3.70 5.0
3.0 4.39 6.0
4.0 5.73 8.0
5.0 7.01 10.0
60 x 60 x 3.0 5.32 6.0 7.5
4.0 6.97 8.0
5.0 8.56 10.0
6.0 10.09 12.0 6.0
70 x 70 x 3.0 6.26 6.0 7.5
3.5 7.25 7.0
5.0 10.12 10.0
75 x 75 x 3.0 6.73 6.0 7.5
80 x 80 x 3.0 7.19 6.0 7.5
3.5 8.34 7.0
4.0 9.46 8.0
5.0 11.68 10.0
6.0 13.82 12.0
8.0* 17.93 20.0 12.0
90 x 90 x 3.5 9.43 7.0 7.5
5.0 13.23 10.0
6.0* 15.69 15.0 12.0
100 x 100 x 3.0 9.06 6.0 7.5
4.0 11.96 8.0
5.0 14.79 10.0
6.0 17.56 12.0
8.0* 22.92 20.0 12.0
10.0* 27.90 30.0
120 x 120 x 5.0 17.90 10.0 7.5
150 x 150 x 5.0 22.57 10.0 7.5
6.0 26.90 12.0
DIN 17120 S235JRH Cold Formed Rectangular Hollow Sections
HxB (mm) Wt (mm) Kg/m Er L(m)
40 x 20 x 2.0 1.74 4.0 7.5
50 x 25 x 2.0 2.21 4.0 7.5
2.5 2.72 5.0
3.0 3.22 6.0
50 x 30 x 2.5 2.92 5.0 7.5
3.0 3.46 6.0
60 x 40 x 2.5 3.70 5.0 7.5
3.0 4.39 6.0
4.0 5.73 8.0
5.0 7.01 10.0
75 x 50 x 3.0 5.56 6.0 7.5
80 x 40 x 2.0 3.61 4.0 7.5
2.5 4.48 5.0
3.0 5.32 6.0
4.0 6.97 8.0
5.0 8.56 10.0
90 x 50 x 3.5 7.25 7.0 7.5
5.0 10.12 10.0
100 x 50 x 2.5 5.64 5.0 7.5
3.0 6.73 6.0
4.0 8.84 8.0
5.0 10.90 10.0
6.0 12.89 12.0
100 x 60 x 3.5 8.34 7.0 7.5
120 x 60 x 3.5 9.43 7.0 7.5
5.0 13.23 10.0
120 x 80 x 5.0 14.79 10.0 7.5
150 x 100 x 5.0 18.68 10.0 7.5
6.0 22.23 12.0
160 x 80 x 5.0 17.90 10.0 7.5
200 x 100 x 5.0 22.57 10.0 7.5
S235JRH Equivalent Material
DIN R St 37-2
Werkstoff 1.0038
EN S235JRH
EN 10219 Pipe Composition
Steel No.
Carbon Silicon Manganese phosphorus Sulfur Nitrogen
1.0039 0.17 – 1.40 0.040 0.040 0.009
1.0149 0.20 – 1.50 0.035 0.035 0.009
1.0138 0.20 – 1.50 0.030 0.030 –
1.0547 0.22 0.55 1.60 0.035 0.035 0.009
1.0576 0.22 0.55 1.60 0.030 0.030 –
1.0512 0.22 0.55 1.60 0.030 0.030 –
EN 10219 Steel Grade Pipe Mechanical Properties
Steel Number Mechanical Properties Impact Energy
Yield Strength Tensile Strength Elongation Temperature
-20 0 20
1.0039 235 360-510 26 – – 27
1.0149 275 410-560 23 – 27 –
1.0138 275 410-560 23 27 – –
1.0547 355 510-680 22 – 27 –
1.0576 355 510-680 22 27 – –
1.0512 355 510-680 22 40 – –
1.0039 Steel Square Tube Standard sizes
  • Square hollow sections - These are manufactured up to a maximum size of 250x250 mm
  • Circular hollow sections - These are manufactured up to a maximum size of 300 mm NB
  • Rectangular hollow sections - These are manufactured up to a maximum size of 300x200 mm

EN 10219 S235JRH Tube Finish
  • straightened condition 1/600th
  • mill straightened condition l/200th
Manufacturing process of EN 10219 S235JRH Tube
  • Seamless,
  • Hot finished welded, or
  • Electric resistance or induction welded
S235JRH EN 10219 Pipe Application
  • 1.0039 Steel Pipes used in Pump Oil or Gas
  • EN 10219-1 S235JRH Pipe material for Refineries
  • Compressor Stations
  • Natural Gas Transmission EN 10219-2 S235JRH Pipes
  • Steam Conduction
  • DIN 17120 S235JRH Piping material for Generator Plants
  • Seamless and Welded EN 10219 Steel Grade Pipes for Low Temperature Resistance
  • Boiler Industry of High-Temperature Resistance
1.0039 Steel Pipe Test Requirements
  • Hydrostatic Tests for EN 10219 S235JRH Pipe
  • EN 10219 S235JRH material Eddy Current Test
  • Metalography Test performed for S235JRH Pipes
  • EN 10219 Pipe Ultrasonic Testing
  • S235JRH Steel material MP / DP / RF ECT Testing
  • TPP and CVN Impact Testing
  • Visual Inspection
  • BHN Hardness & Rockwell Testers
1.0039 Steel Test Requirements
EN 10219-1 S235JRH Pipe Different manufacturing processes
  • EN 10219 S235JRH Hot Finished Seamless (HFS)
  • S235JRH Cold Drawn or Finished Seamless (CDS)
  • EN 10219 Electric Resistance Welding (ERW)
  • S235JRH Steel High Frequency Induction Welding (HFIW)
  • S235JRH EN 10219 Hot Finished Welding (HFW) Pipe
  • 1.0039 Steel Butt Welded Pipes (BWP)
  • EN 10219-1 S235JRH Electric Fusion Welding (EFW) Pipe
  • EN 10219-2 S235JRH Sub-merged Arc Welding (SAW) Pipe
  • DIN 17120 S235JRH Cold Drawn Electric Resistance Welding (CEW) Pipe
  • EN 10219 Steel Grade Oxy Acetylene Welding (OAW) Pipe
  • EN 10219 S235JRH Hand-Welding or Manual Arc Welding (MAW) Pipe
EN 10219-1 S235JRH Pipe manufacturing processes
EN 10219-2 S235JRH Pipe Marking
Marking on EN 10219 S235JRH Pipe
  • EN 10219 S235JRH Pipe Manufacturer’s name
  • S235JRH Grade and type
  • Monogram marking
  • Heat treatment
  • Impact test temperature
  • End finish of S235JRH Pipes and Tubes
  • Manufacturing process
  • Weight
  • EN 10219 Pipe Grade and type
  • S235JRH Steel material Heat treatment
  • Type of S235JRH EN 10219 Pipe thread
  • Impact test temperature
EN 10219 S235JRH Pipe

Trident Steel also marks each bundle of EN 10219 S235JRH Pipe with plastic/ metal tags which includes:

  • The EN 10219 S235JRH Pipe process of manufacture
  • Source of EN 10219 S235JRH Pipe manufacturer
  • S235JRH Material Size Range
  • Identification mark/ Batch number for factory records
  • License Number
  • Made in France/ Italy/ India/ Korea/ Germany/ Japan/ China (if required)





bundle of EN 10219 S235JRH Pipe
DIN 17120 S235JRH Pipe Coating Types
EN 10219 S235JRH LE Liquid Epoxy Coated Pipe
EN 10219 S235JRH LE Liquid Epoxy Coated Pipe
S235JRH 3LPE Coated Pipes
S235JRH 3LPE Coated Pipes
EN 10219 FBE Coated Pipe
EN 10219 FBE Coated Pipe