Supply Range and Dimensions For S275JR Steel Pipe
- S275JR Steel Pipe Size: 1/2" - 38"
- En 10025-2 RHS Schedules: SCH 5 to XXS
- DIN 1.0044 Steel Hollow Section Length: 12 Meter, Custom
- S275JR EN 10025 Square Tube MTC : EN 10204/3.1B
- S275JR Box Section Delivery Conditions: AR, HR, N
- En10025 S275JR Tube Impact Test: -52° C
- Export Areas: Singapore, Malaysia, Thailand, Indonesia, Indian, Japanese
Trident Steel & Engg. Co. Supplies S275JR Steel Pipes With Wide Range of Sizes. Click Here For Data Sheet.
En 10025-2 S275JR Pipe and RHS Supplier in India and Thailand, Refer Equivalent Grades
S275JR Steel Equivalent Grade
| EN | JIS | UNI | IS | DIN,WNr | AFNOR | ASTM | ISO |
|---|---|---|---|---|---|---|---|
| S275JR | SS400 | Fe430B | IS2062 | RSt42-2 St 44-2 |
E28-2 | A283D A529 Gr.D |
E275B |
EN 10025 S275JR Carbon Steel Tube
BS EN 10025-S275JR Pipe
S275JR Hollow Section
| Mechanical Testing Such as Tensile of Area |
| Hardness Test |
| Chemical Analysis – Spectro Analysis |
| Positive Material Identification – PMI Testing |
| Flattening Test |
| Micro and Macro Test |
| Pitting Resistance Test |
| Intergranular Corrosion (IGC) Test |
| EN10204 3.1 / DIN 50049 3.1 / isO 10474 3.1 MTC |
| NACE MR-0175 / isO 15156 |
| NACE MR-01-03 / NACE MR-01-75 / isO 15156 |
| European Pressure Equipment Directive PED-97/23/EC |
| AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed |
| CE Marked |
Table of contents
- S275JR Steel Pipe Specification
- Grade S275JR Box Hollow Sections Mechanical Properties
- S275JR Steel Pipe and Tube Price List
- EN 10025 S275JR Carbon Steel Tube Coating
- S275JR Steel Tube Applications
- En 10025-2 S275JR RHS Documentation
- S275JR Steel Square Tube Chemical Composition
- Ready Stock of En10025 S275JR Pipe
- Alternative Names For S275JR Steel
- 1.0044 Steel Structural Pipe Physical Properties
- S275JR Corrosion Resistance
- EN 10025 S275JR Circular Hollow Section Weldability
- S275JR Hollow Section Heat Resistance
- 10025 S275JR Steel Pipe Machinability
- S275JR Grade Steel Heat Treatment
- S275JR Steel Client Reference List
- En 10025-2 S275JR Pipe and Tube Shipping Time
S275JR Steel Pipe Specification
S275JR Steel Pipe Supplier in India, Colombia, Netherlands, Indonesia and Cambodia at Factory Price
S275JR Steel Pipe Size Range
- 1/2" - 38" (DN15-950)
Grade S275JR Tube Thickness Range
- SCH 5S-SCH XXS
EN 10025 S275JR Steel Pipe Swg & Bwgs
- 10 Swg, 16 Swg, 18 SWG
Grade S275JR Box Hollow Sections Length
- 6000 to 18000mm
1.0044 Steel Structural Pipe End
- Beveled
- Plain
EN 10025 S275JR Circular Hollow Section Coating
- 3LPE, 3PP
- Anti rust oil
S275JR Steel Pipe Origin
- European
- Singapore
- UK, American
- Indonesia
En 10025 Din 17100 S275JR RHS Packaging
- Steel strips bundled
- Plastic end cap
- Wooden crates
Stockist of S275JR Box Hollow Sections With High Yield Strength at Best Price in Malaysia
Grade S275JR Box Hollow Sections Mechanical Properties
Stockholder of S275JR Steel Pipe With High Tensile and Yield Strength at Lowest Price in Saraburi, Jakarta, Surabaya, West Java and Kepulauan RIAU
| Property | Tensile Strength | Yield Strength (0.2% offset) | Elongation | Hardness (Brinell) | Reduction of Area | Impact Strength (Charpy) |
|---|---|---|---|---|---|---|
| Condition/Temper | As Rolled | As Rolled | As Rolled | As Rolled | As Rolled | -40°C |
| Typical Value/Range (Metric) | 410 - 560 MPa | 275 MPa | ≥ 20% in 50 mm | ≤ 195 HB | ≥ 30% | ≥ 27 J |
| Typical Value/Range (Imperial) | 60 - 81 ksi | 40 ksi | - | - | - | ≥ 20 ft-lbf |
| Reference Standard for Test Method | EN 10002-1 | EN 10002-1 | EN 10002-1 | EN 10003-1 | EN 10002-1 | EN 10045-1 |
S275JR Steel Pipe and Tube Price List
To Know About S275JR Steel Pipe, Tube and Hollow Section Price Per Kg in India, Indonesia and Malaysia Please Contact Us
Distributor of En 10025 S275 1.0044 Steel Hollow Section With Anti Rust Oil and 3LPE Coating For Structural Applications
EN 10025 S275JR Carbon Steel Tube Coating
S275JR Steel Tube Applications
- Construction
- Automotive
- Manufacturing
- Shipbuilding
Stockholder of Grade S275JR Tube and EN 10025 S275JR Hot Finished Structural Hollow Sections With MTC EN 10204/3.1B
En 10025-2 S275JR RHS Documentation
- Commercial Invoice which includes HS Code
- Fumigation Certificates
- Material Traceability Records
- Packing List including net weight and gross weight, number of boxes, Marks and Numbers
- Test Certificates certifying NACE MR0103, NACE MR0175
- Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
Refer to the EN 10025 S275JR Carbon Steel Circular Hollow Section Chemical Composition
S275JR Steel Square Tube Chemical Composition
Stockist of S275JR Steel Pipe With Sulfur Content 0.04 and Carbon 0.22 % For Structural Application
| Element | S | Mn | C | P | Si |
|---|---|---|---|---|---|
| Percentage Range (%) | ≤ 0.04 | 1.0 - 1.6 | 0.14 - 0.22 | ≤ 0.04 | 0.0 - 0.4 |
Ready Stock of En10025 S275JR Pipe
Distributor of S275JR Steel Pipe With Various Form at Low Cost in Russia, Turkey, Australia and New Zealand
Alternative Names For S275JR Steel
| Standard Organization | DIN | EN | ASTM | ISO | JIS |
|---|---|---|---|---|---|
| Designation/Grade | St37-2 | S275JR | A36 | S275 | SS400 |
| Country/Region of Origin | Germany | Europe | USA | International | Japan |
| Notes/Remarks | Minor compositional differences | Standard structural steel grade | Closest equivalent, slightly lower yield strength | General equivalent designation | Similar properties, but may vary in yield strength |
1.0044 Steel Structural Pipe Physical Properties
| Property | Specific Heat Capacity | s275jr Density | Thermal Conductivity | Electrical Resistivity | Melting Point | Coefficient of Thermal Expansion |
|---|---|---|---|---|---|---|
| Condition/Temperature | - | - | 20°C | - | - | 20 - 100 °C |
| Value (Metric) | 0.49 kJ/kg·K | 7850 kg/m³ | 50 W/m·K | 0.0000017 Ω·m | 1420 - 1460 °C | 12 x 10⁻⁶ /K |
| Value (Imperial) | 0.12 BTU/lb·°F | 490 lb/ft³ | 34.5 BTU·in/h·ft²·°F | 0.0000017 Ω·in | 2590 - 2660 °F | 6.7 x 10⁻⁶ /°F |
| Corrosive Agent | Chlorides | Atmospheric | Acids | Alkalis |
|---|---|---|---|---|
| Temperature (°C) | Ambient | - | Ambient | Ambient |
| Concentration (%) | Low | - | - | - |
| Resistance Rating | Poor | Fair | Poor | Fair |
| Notes | Risk of pitting corrosion | Susceptible to rust | Not recommended | Moderate resistance |
EN 10025 S275JR Circular Hollow Section Weldability
| Welding Process | TIG Welding | MIG Welding | Stick Welding |
|---|---|---|---|
| Typical Shielding Gas/Flux | Argon | Argon + CO2 | - |
| Recommended Filler Metal (AWS Classification) | ER70S-2 | ER70S-6 | E7018 |
| Notes | Good for precision work | Excellent for thin sections | Requires preheat |
S275JR Hollow Section Heat Resistance
| Property | Max Intermittent Service Temp | Max Continuous Service Temp | Scaling Temperature |
|---|---|---|---|
| Temperature (°F) | 932 °F | 752 °F | 1112 °F |
| Temperature (°C) | 500 °C | 400 °C | 600 °C |
| Remarks | Short-term exposure only | Suitable for structural applications | Risk of oxidation beyond this limit |
10025 S275JR Steel Pipe Machinability
| Machining Parameter | Typical Cutting Speed (Turning) | Relative Machinability Index |
|---|---|---|
| S275JR | 80 m/min | 70 |
| AISI 1212 | 120 m/min | 100 |
| Notes/Tips | Use high-speed steel tools | Good machinability |
S275JR Grade Steel Heat Treatment
| Treatment Process | Normalizing | Annealing | Quenching & Tempering |
|---|---|---|---|
| Temperature Range (°C) | 850 - 900 | 600 - 700 | 850 - 900 (quench) |
| Typical Soaking Time | 1 - 2 hours | 1 - 2 hours | 1 hour |
| Cooling Method | Air | Air | Water/Oil |
S275JR Steel Client Reference List
| Location | Projects | Material |
|---|---|---|
| Qatar | QAFCO 3 Project | S275JR Steel Pipe |
| Italy | EFRA Project | En 10025-2 S275JR RHS |
| Germany | Scholven Phase III CHP Plant | S275JR Box Hollow Sections |
| Dubai | Jebel Ali expansion project | En 10025 S275 1.0044 Steel Tube |
| Netherlands | REACTOR REPLACEMENT FOR R-501 POWERFORMING UNIT ROTTERDAM REFINERY | Grade S275JR Box Section |
| Egypt | Asorc Naphtha complex project (ISBL) | EN 10025 S275JR Hot Finished Structural Hollow Sections |
| Oman | Duqm refinery projects | EN 10025 S275JR Carbon Steel Circular Hollow Section |
En 10025-2 S275JR Pipe and Tube Shipping Time
| TO (Airport) | TO (Sea) | Region | Sea Freight | Air Freight |
|---|---|---|---|---|
| Suvarnabhumi Airport | Laem Chabang Port | Thailand | 16–20 days | 1–2 days |
| Singapore Changi Airport | Port of Singapore | Singapore | 14–18 days | 1–2 days |
| Kuala Lumpur International Airport | Port Klang | Malaysia | 13–17 days | 1–2 days |
| Soekarno–Hatta International Airport | Tanjung Priok Port | Indonesia | 17–22 days | 2–3 days |
