FBE Coated Fittings in Single and Dual Layer

Epoxy Coated Elbow for Oil & Gas Production Projects

Specification	ASME B16.9
Manufacturing Sizes	Buttweld : 1/2″- 36″
	Seamless : 1/2″- 24″
	Welded : 24″ - 96″
Wall Thickness	SCH 10 to SCH 80 SCH 90 to SCH 140 SCH 160 to SCH XXS
End	Plain Bevel / Butt welding / Bevelled
Meet Standard	JIS / DIN / ISO / EN
Manufacturing Technique	Welding / Casting Butt Weld / Forged / Pushing
Types	Elbow Tee Reducer Cap Stub End Pipe Bend Pipe Cross
MTC	EN 10204 3.1/ 3.2

TEST	STANDARDS	RESULT	CONDITIONS
Direct Impact	ASTM D2794	40 IN - lbs Min.
Gloss 60°	ASTM D523	70-85
Pencil Hardness	ASTM D3363	Pass 4H
Adhesion	ASTM D3359 Method A	5A	X-cut and Tape
Abraison Resistance	ASTM D4060	loss of 32 mg	CS-17 Wheels, 1 kg Load, 1000 Cycles
Salt Spray	ASTM B117	No Face Rust, Blisters, or Noscoreline Creepage	1000 Hours
Adhesion	ASTM D3359 Method B	5B	Crosshatch and Tape

The Following Chemicals Are Suggested for Use in Immersion Environments
Sewage Water	Diesel Fuel
Trisodium Phosphate (5% Soln.)	Hexane
Salt Water	Calcium Sulfate (Saturated Soln.)
Kerosene	Aliphatic Hydrocarbons
Sodium Nitrate (10% Soln.)	Gasoline (unleaded)
Magnesium Sulfate (Saturated Soln.)	Calcium Carbonate (Saturated Soln.)
Sodium Hydroxide (5% Soln.)	Fuel Oil
Motor Oil	Calcium Chloride (10% Soln.)
Sodium Chloride (5% Soln.)	Fresh Water
Potassium Acetate (Saturated Soln.)	Calcium Hydroxide (10% Soln.)
Soap Soln.s	Distilled Water

FBE Coated 5D Elbow

Fusion Bonded Epoxy Coating 10D Elbow

Epoxy Lining 3D Elbow

FBE Lined Carbon Steel Short Radius Elbow

Epoxy Coated 1D Elbow

FBE Lined 180 Degree Elbow

FBE Lined Carbon Steel 45 Deg Elbow

Epoxy Coated Long Radius Elbow

FBE Lined Carbon Steel 90 Deg Elbow

FBE Coated Reducing Tee

Fusion Bonded Epoxy Coating Equal Tee

Epoxy Lined Carbon Steel Unequal Tee

Single Layer FBE Coated Lateral Tee

Epoxy Coated Fabricated Tee

FBE Lined Carbon Steel Split Tee

FBE Coated Concentric Reducer

Epoxy Lining Eccentric Reducer

Epoxy Lined Carbon Steel End Caps

FBE Lined Carbon Steel Long Stub End

Epoxy Lined Carbon Steel Short Stub End

FBE Coated Cross

Epoxy Lined Carbon Steel 45 Deg Bend

Fusion Bonded Epoxy Coated 90 Degree Bend

Epoxy Lining 180 Degree Pipe Bend

FBE Coated Long Radius Bend

Epoxy Coated Short Radius Bend

Fusion Bonded Epoxy Coating U Bend

Items for inspection	Test result
Surface Preparation Inspection	Shot Blasting to Sa2.5
Coating Appearance Inspection	Uniform, No Pinholes or Bubbles.
Color Difference Inspection	Compare Product Color With Ral Card for Differences.
Powder Adhesion	Adhesion Test: Mean ≥ 8 Mpa, Min Single ≥ 6 Mpa.
Thickness Inspection	Mean ≥250 Microns for 10 Points
Wipe With MIBK Methyl Isobutyl Ketone	Wipe With Mibk, No Color on Cloth
Impact Resistance Inspection	Drop 500g Metal Ball From 1m, Coating Intact